If your garage door rubs, jerks, or stops partway, a bent or misaligned track may be disrupting its travel. Stop using a door that is stuck or moving crooked. Forcing it can add strain or let a roller leave its path.
In the Valley of the Sun, we inspect the full route from the vertical rails to the overhead rails. A curved section called the radius connects them. At the doorway, flags and jamb brackets hold the vertical rails in place; rear hangers carry the overhead runs. If a track or support shifts, rollers may scrape, the door may bind, or a gap may appear.
Our crew secures the door before track work and stays clear of loaded spring parts. We inspect the rails, radius, brackets, hangers, rollers, and clearances. We repair a usable rail by correcting its position; if damaged, we install a new section, then set track alignment and secure each support. Our service vehicle has replacement rail pieces, mounting hardware, and alignment tools. If a hinge, roller, or bearing needs lubrication, we treat that part and keep the track surface dry.
Signs You Need Garage Door Track Repair
- I hear scraping when the door moves.
- The door rubs along one side.
- It jerks or shakes as it opens.
- It stops before it is fully open or closed.
- I see a bent or loose track.
- One side moves ahead of the other.
The Kierland Heat Factor
If your garage door scrapes or moves unevenly, our crew checks the track and its supports before making repairs. Summer afternoons here average about 105°F, and winter nights average about 47°F. Temperature shifts can change metal dimensions slightly, but they do not prove a rail is bent.
We inspect the rails, brackets, hangers, and roller path with the door closed and through its full travel. If a track has shifted, we secure or realign it. If the rail is bent or damaged, we replace the affected section so the rollers can move along a clear path.
How We Handle It
We take your call
Our office asks what you notice, such as rubbing, a stuck door, or uneven movement. We arrange a visit to inspect the track problem.
We inspect and quote
Our crew examines the rails, supports, and rollers, then explains the repair. You get the exact quote at your home before any work starts.
We repair the track
We stabilize the door, then correct a straightenable rail or fit a replacement section. Next, we set track alignment and fasten the supporting hardware, keeping clear of spring tension.
We test the door
As a final step, we assess door balance, then verify the safety-reversal system. We also confirm that it travels through its full path without binding.
Starting Prices — Garage Door Track Repair
- Track Repair & Off-Track Door per door
- From $150
- Diagnostic Service Call $0 with a completed repair
- $0
Starting prices. A door has two lift cables and one or two springs; the exact price depends on the door, the hardware grade and how many parts are replaced, and is confirmed on site before any work starts.